Omron NTXS - Page 103

Representing Data
97
Operation
Meter Operation
1. Meter Start Angle : The value indicating the start angle, in degrees, of the meter scale.
2. Meter End Angle : The value indicating the end angle, in degrees, of the meter scale.
3. Start Tag Value : The minimum value to display on the meter scale.
4. End Tag Value : The maximum value to display on the meter scale.
5. Tag : A NTXS unit tag or PLC tag that the meter uses for needle deflection.
Data Type
The following data types can be used with the meter -
1. Unsigned integer 2. Signed integer
3. Hexadecimal 4. BCD
The meter object only displays a two byte tag.
Simulate
The designer can simulate the label text of various languages configured in the wizard and can see a
preview in the preview window.