Task Management
117
Write Value To Tag
A constant value can be written to a tag using this task, provided the tag is not a read-only tag.
E.g..- Tag = Number
This task is executed on register tag listed under Tag option. User can write only two bytes number in
selected tag .
If tag is defined as 1 byte - Low-byte transfer to low-byte.
2 byte – Low and High-bytes transfers respective bytes of tag.
4 byte – Only Low-word transfer to tag.
For this task default setting is shown under ‘Register operations’. If user change this selection, task will
be changed.
User can select number type - unsigned int , Signed, Hexadecimal, BCD and Binary.
User can select number type - unsigned int , Signed, Hexadecimal, BCD and Binary.
Click ‘OK’ to add task in task list.
To Next Page
Loading...
