Task Management
118
Add a Constant Value To Tag
This tag is used for adding a constant value to the current value of the tag.
E.g.- Tag = Tag + Number
This task is executed on register tag listed under Tag option. User can add only two byte number in
selected tag.
Tag Type Operation Number Result
1 Byte + 2 Byte 1 Byte
2 Byte + 2 Byte 2 Byte
4 Byte + 2 Byte Lower 2 Byte
For this task default setting is shown under ‘Register operations’. If user change this selection, task will
be changed. User can select number type - unsigned int, Signed, Hexadecimal, BCD and Binary.
Click ‘OK’ to add task in task list.
To Next Page
Loading...
