Omron NTXS - Page 125

Task Management
119
 Subtract a Constant Value From Tag
This task is used to subtract a constant value from the current value of a tag.
E.g.- Tag = Tag - Number
This task is executed on register tag listed under Tag option. User can subtract only two byte number in
selected tag.
Tag Type Operation Number Result
1 Byte - 2 Byte 1 Byte
2 Byte - 2 Byte 2 Byte
4 Byte - 2 Byte Lower 2 Byte
For this task default setting is shown under ‘Register operations’. If user change this selection, task will
be changed.
User can select number type - unsigned int, Signed, Hexadecimal, BCD and Binary.
Click ‘OK’ to add task in task list.