Omron OMNUC R88D-WT15HF User Manual

3-14
10. Analog Monitor Cable
This is the cable for connecting to the Servo Driver’s Analog Monitor Connector (CN5). It is required for
connecting analog monitor outputs to an external device (such as a measuring instrument).
Name/specifications Model Remarks
Analog Monitor Cable 1 m R88A-CMW001S Only 1-meter cables are available.
System Design and Installation
Chapter 3

Omron OMNUC R88D-WT15HF Specifications

General

Brand	Omron
Model	OMNUC R88D-WT15HF
Category	Servo Drives
Language	English