Omron OMNUC R88D-WT15HF User Manual

1-8
Note 2. The DeviceNet Option Unit is supported by W-series Servo Drivers with a software version of
r.0014 or later.
Note 3. The MECHATROLINK-II Option Unit is supported when using MECHATROLINK-II Option
Unit software version VER.***03 (indicated on the nameplate on the side of the Unit) in com-
bination with a W-series Servo Driver with software version r.0039 or later. Refer to 4-11-10
Checking the Version for methods of confirming the Servo Driver software version.
Introduction Chapter 1

Omron OMNUC R88D-WT15HF Specifications

General

Brand	Omron
Model	OMNUC R88D-WT15HF
Category	Servo Drives
Language	English