Omron Powli BU75RW - Stationary Installation Methods

2.Installation and connection
14
2-2-2. Stationary installation
Perform installation only as shown in the diagrams below.
●
Horizontal installation
Attach the included rubber feet for horizontal installation (14.5 mm depth) to the round stickers
on the unit (4 locations) and position the unit horizontally.
For stationary horizontal installation, make sure that this product does not slide or fall.
BU200RW/BU300RW
●
Upright installation
(1) Upright installation
Use the stand included with the product.
Attach the included rubber feet for upright installation (1.7 mm depth) to the bottom of the unit (4
locations illustrated below) and to the bottom of the stand (1 for each).
BU200RW/BU300RW
BU75RW/BU100RW