BU75RW/BU100RW/BU200RW/BU300RW
2
13
Always use the support angles.
(5) Place the UPS on the support angles and push it completely into the rack
⑤
, and use the
2 included unit fi xing screws and unit fi xing nuts to securely fasten the ear brackets to the
server rack.
⑥
If the position of the screw holes on the ear brackets do not match up with those on the JIS rack,
use a single screw and the elongated screw holes in the middle of the ear brackets to fasten
each the left and right bracket to the rack.
5
Push completely in
6
Use the unit
fixing screws to fasten
To Next Page
Loading...
