1-3SectionHow Does a PC Work?
6
1-3 How Does a PC Work?
PCs operate by monitoring input signals and providing output signals. When
changes are detected in the signals, the PC reacts, through the user-pro-
grammed
internal logic, to produce output signals. The PC
continually cycles the
program in its memory to achieve this control.
Block Diagram of PC
Power Supply
Input Output
CPU
Memory
Programming
Device
Signals
from
switches,
sensors,
etc.
Signals to
Solenoids,
motors,
etc.
A program for your applications must be designed, and stored in the PC. This
program is then executed as part of the cycle of internal operations of the PC.
Cycle
When
a
PC operates, that is, when it executes its program to control an external
system,
a series of
operations are performed inside the PC. These internal op
-
erations can be broadly classified into the following four categories:
1, 2, 3...
1. Common
(or overseeing) processes, such as watchdog timer operation and
testing the program memory.
2. Data input and output.
3. Instruction execution.
4. Peripheral device servicing.
Cycle Time
The
total time required for a PC to perform all these internal operations is called
the
cycle time. The
flowchart and diagram on the following page illustrate these
internal operations for a typical PC.
Timing
is one of the most important factors in designing a Control System.
For
accurate
operations, it is necessary to have answers to such
questions as these:
• How
long does it take for the PC to execute all the instructions in its memory?
• How
long does it take for the PC to produce a control
output in response to a
given input signal?
The
cycle time of the PC can be automatically calculated and monitored,
but it is
necessary to have an understanding of the timing relationships within the PC
for
effective System design and programming.
Downloaded from Elcodis.com electronic components distributor
To Next Page
Loading...
Need help?
General
