51
SECTION 6
Power Considerations
Use
a commercially available 100 to 120 V
AC, 200 to 240 V
AC, or 24 VDC power source, according to the model of PC you
are
using (refer to
Appendix B Specifications
). Expansion I/O Racks, if used, must also be connected to the power source. If
possible,
use independent power sources for the PC, input devices, and output
devices. All Racks of the PC may be connected
to one power source.
6-1 Grounding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6-2 Insulation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6-3 Emergency Stop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6-4 Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Downloaded from Elcodis.com electronic components distributor
To Next Page
Loading...
