Omron SYSMAC C200H CPU01-E User Manual

5-2SectionMounting Requirements
48
The DIN Rail Mounting Bracket shown below is necessary for mounting the PC
to the DIN Rail.
Procedure
1, 2, 3... 1. The following diagram is a view of the back of the Backplane. Attach one
Mounting Bracket to the left and right sides of the Backplane as shown be -
low.
DIN Rail Mounting
Bracket
There are two Back-
plane mounting
screws each on the
left and right sides of
the Backplane. Use
these screws to at-
tach the DIN Rail
Mounting Brackets to
the Backplane.
Backplane
2. Mount the Backplane to the DIN Rail so that the claws on the Mounting
Brackets fit into the upper portion of the DIN Rail as shown below.
DIN Rail Mounting Bracket
DIN RailThis claw fits into the DIN Rail
Backplane
DIN Rail Mounting
Bracket
Downloaded from Elcodis.com electronic components distributor
All manuals and user guides at all-guides.com

Omron SYSMAC C200H CPU01-E Specifications

General

Manufacturer	Omron
Operating Temperature	0 to 55°C
Model	C200H-CPU01-E
Humidity	10% to 90% RH (no condensation)
Vibration Resistance	10 to 57 Hz, 0.075 mm amplitude
Shock Resistance	10 G