ix
About this Manual:
This manual explains how to install a C-series C200H Programmable Controller
(CPU01-E/03-E/11-E).
Section
1
is an introduction to Programmable Controllers. General information about what a Programma
-
ble Controller can do and how a Programmable Controller works is provided.
Section
2
provides a description of all the components of the C200H. The names of all the individual parts
of each Unit are given.
Section
3
explains how to assemble the C200H. A detailed description of how to mount each
Unit is pro
-
vided.
Section 4
outlines the system connections involved in installing a C200H Programmable Controller Sys
-
tem. All I/O, including Remote I/O, are included.
Section
5
contains the requirements for the installation environment of the C200H.
Suggestions for pre
-
venting electrical noise are included.
Section 6
explains the power considerations involved in installing the C200H.
Section 7
lists safety considerations that should be kept in mind while installing the C200H.
Appendixes
, a
Glossary
, and an
Index
are also provided.
WARNING Failure to read and understand the information provided in this manual may result in
personal injury or death, damage to the product, or product failure. Please read each
section
in its entirety and be sure you understand the information provided
in the section
and related sections before attempting any of the procedures or operations given.
!
Downloaded from Elcodis.com electronic components distributor
To Next Page
Loading...
Need help?
General
