31
After the data has been written to the EPROM Chip, mount it to the inside of the
EPROM Unit by following these steps.
1, 2, 3... 1. Remove the cover of the EPROM Unit as shown below.
2. Unlock the holding bracket and slide it upward to remove it as shown below
3. Pull the printed circuit board out of the EPROM Unit.
How to Mount an EPROM
Chip to the Memory Unit
Memory Units Section 3-2
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
