7. Connection Procedure
3
Start Internet Explorer from the
personal computer that is
connected to the Switching Hub.
*Set the IP address of the
personal computer to
192.168.1.1. Use the following
procedure to check the IP
address of the personal
computer.
(1)Click Network Connections
on the Control Panel.
(2)Double-click Local Area
Connection on the Network
Connections.
(3)Click the Support Tab on the
Local Area Connection Status
Dialog Box.
(4)Confirm that the IP address is
192.168.1.1.
4
Click Internet Options from the
Tools Menu of the Internet
Explorer.
16
To Next Page
Loading...
