Omron Sysmac CJ Series User Manual

8. Initialization Method
46
8. Initialization Method
This document explains the setting procedure from the factory default setting.
If the device settings are changed from the factory default setting, some settings may not be
applicable as described in this procedure.
8.1. Initializing the PLC
T ed to initialize the Serial Communications Unit and the CPU Unit.
Change to PROGRAM mode before initialization.
8.1.1. Serial Communications Unit
To initialize the settings of the Serial Communication Unit, select Edit - I/O Table and Unit
Setup from the PLC Menu of the CX-Programmer.
On the PLC I/O Table Window, right-click the Serial Communication Unit and select Unit
o initialize the PLC, you ne
Setup.
On the View Parameters Dialog Box, click the Set Defaults Button and click the Transfer [PC
to Unit] Button.

Omron Sysmac CJ Series Specifications

General

Brand	Omron
Model	Sysmac CJ Series
Category	Rfid Systems
Language	English