Omron Sysmac CJ Series - Page 42

7. Connection Procedure
9
The dialog box on the right is
displayed. Select the Inclu
Source Information Check Box
de
and click the Compile Button.
10
When 100% is displayed in the
Complied % Column, the
compile operation is completed.
mpile
Compare Button.
After confirming that the co
operation is completed, click the
11
The dialog box on the right is
displayed. Click the OK Button.
12
Check that 100% is displayed in
the Compared % Column in the
right figure, and click the Close
Button.
39