9. Program
66
9.6.2. Protocol Macro Processing Procedure
essing procedure of the protocol macro. This section describes the proc
1. [Step No.00]
Issuing Send Message (SD_GETRVER)
↓
2. When step No.00 ends normally When step No.00 ends abnormally
↓ ↓
3. Next Process: Terminates the
communications sequence as an
End.
Error Process: Interrupt the step as an s
Abort and termi nications nates the commu
sequence.
↓ ↓
(End) (End)
To Next Page
Loading...
