9. Program
79
vice Error Codes
monitoring the communications of the
he PLC sends a command. The error codes for are stored in H402
8 7 0
9.2.2. Destination De
The destination device errors are detected while
destination device when t
(Output_DestinationDeviceErrorCode).
[Format]
Bit 15
Response code
#**: Main #**: Sub
ode list] [Response c
Note1: 'x' character in response code means one character in the list of 0 to 9 or A to F.
Note2: Depends on the specification of IC chip equipped in the RF tag. ( It occurs at Monza chip when it
specified the lock bit which does not exist in its memory map.
To Next Page
Loading...
