40
Comparison to Previous Products Section 1-7
Send/receive messages Reception length No check. The length of data set in the
expected reception message
will be fetched from the recep-
tion buffer as the message.
Error check codes No LRC2 or SUM1 checks. LRC2 and SUM1 supported.
Interrupt notification function Supported. Boards: Supported.
Units: Not supported.
Simple Backup Function None The CPU Unit’s Simple Backup
Function can be used to backup
the Protocol Macro data in the
Serial Communications
Board/Unit to the CPU Unit’s
Memory Card. The backed-up
data can be restored or com-
pared.
(When a CS1-H CPU Unit is
being used, this function is sup-
ported by the CS1W-SCB21-
V1, CS1W-SCB41-V1, CS1W-
SCU21-V1, and CS1W-SCU31-
V1. When a CJ1-H CPU Unit is
being used, this function is sup-
ported by the CJ1W-SCU21(-
V1), CJ1W-SCU31-V1 and
CJ1W-SCU41(-V1).)
Item C200HX/HG/HE CS/CJ
To Next Page
Loading...
