3 Startup and Exit
3 - 2
NA-series Programmable Terminal Soft-NA User’s Manual (V126)
3-1 Starting the Soft-NA
The method of starting the Soft-NA is described below.
The Soft-NA can be started by the
following two methods.
• Double-click the Soft-NA icon on
the desktop.
•Select OMRO
N - Soft-NA from the Start menu, and then click the Soft-NA icon.
If settings have been made to automatically execute the Soft-NA when Windows is started, the
Soft-NA may be executed before the startup of the service necessary for executing the
Soft-NA, or before the completion of authentication of the USB dongle. In such a case, the
Soft-NA startup results in a failure.
If you want to make the settings to automatically execute the Soft-NA when Windows is started,
take measures such as delaying startup.
If a project is being transferred, the Soft-NA will start after the project being transferred has been
loaded. Therefore, use the Soft-NA as is.
The procedure of starting the Soft-NA when a project is not being transferred is described below.
1 Double-click the Soft-NA icon.
2 Double-click any of the four corners of the window.
Starting the Soft-NA
To Next Page
Loading...
Need help?
General
