5 Functionalities of Sysmac Studio
5 - 2
NA-series Programmable Terminal Soft-NA User’s Manual (V126)
5-1 Functionalities of Sysmac Studio
The functionalities of Sysmac Studio that have been changed for use with the Soft-NA are described
below.
Functionalities that are not supported by the Soft-NA have been deleted. Also, the settings for function-
alities specific to the Soft-NA
have been added.
5-1-1 HMI Settings
Functionality name Change Description
Device Settings Changed Changed according to the functionalities of the Soft-NA.
TCP/IP Settings Deleted In the case of the Soft-NA, the settings of the PC on which the
Soft-NA is installed are used as network settings.
Make the settings from Network and Internet under Windows
Settings.
FTP Settings Deleted Not provided as a functionality of the Soft-NA because various
FTP servers have been provided on Windows.
The customer is requested to make arrangements for other appli-
cations such as IIS, etc.
NTP Settings Deleted Because the settings of the PC itself are used, make the settings
from Date Time under Windows Settings.
FINS Settings Deleted Not supported because the Soft-NA does not support the connec-
tion with the CJ-series. If it is necessary to connect to the
CJ-series, use the NA5 series PT.
VNC Settings Deleted Not provided as a functionality of the Soft-NA because functional-
ities such as VNC have been provided on Windows.
Either use a Windows standard remote desktop, or a VNC server
manufactured by a third party.
Print Settings Not changed There are no changes in the print settings.
To Next Page
Loading...
Need help?
General
