Omron Sysmac NJ-series - Page 32

7．EtherNet/IP Connection Procedure
29
5
Click the Output Tab.
Right-click on a space on the
Output Tab Page, and select
Create New Tag Set from the
menu.
6
A new tag set name can be
entered. In the same way as
step 3, enter EIP002_OUT.
7
In the same way as step 4,
enter the global variable as a
tag, which is listed in 6.3. Tag
Sets.
8
Check that the number of Tag
Sets is 2 and that the number of
Tags shows the total number of
set global variables (e.g. 2).