Omron Sysmac NJ-series Network Connection Guide

7．EtherNet/IP Connection Procedure
32
7.3.7. Transferring the Project Data
Place Sysmac Studio online and transfer the connection settings and project data to the
Controller.
Regardless of the operating mode of the CPU Unit, devices or machines may
perform unexpected operation when you transfer any of the following data from
Sysmac Studio: a user program, configuration data, setup data or device
variables.
Always ensure safety at the destination node before you transfer the project
data.
1
Turn ON X-gateway, Controller
and Switching hub.
2
Select Check All Programs
from the Project Menu.
3
The Build Tab Page appears.
Check that the tab page shows
the results "0 Errors" and "0
Warnings".
4
Select Rebuild Controller from
the Project Menu.
5
The dialog box on the right
appears. Confirm that there is
no problem, and click Yes.
6
Check that the results "0 Errors"
and "0 Warnings" are displayed
on the Build Tab Page.

Omron Sysmac NJ-series Specifications

General

Brand	Omron
Model	Sysmac NJ-series
Category	Computer Hardware
Language	English