ZX Series Displacement Sensor and Parallel Beam Sensor
Compact Amplifier With Digital
Resolution Display Supports 3 Through-
Beam and 8 Displacement Visible Red
Sensing Heads
■ Amplifier supports displacement and parallel
beam sensing applications
■ Diffuse distance measurement up to 500 mm
■ Through-beam measurement up to 10 mm
■ Selectable linear analog output 4-20 mA,
1 to 5 VDC, 0 to 5 VDC,
±4 VDC, ±5 VDC
■ Amplifier displays achieved resolution of
application
■ 3 discrimination outputs: High, Low, Pass
■ FDA class 1 and class 2 visible red laser
■ PC interface for setup, monitoring, direct data
logging
Ordering Information
Important note for ordering:
Choose normally stocked products whenever possible to ensure availability that matches your schedule. Normally stocked items are
shown as shaded in the Ordering Information tables. Non-stocked items are available but are subject to longer lead times. For the most
up-to-date information on stock status, contact your Omron representitive.
■
Sensor Heads
Reflective
Note: For an average sampling of 4,096.
Through-beam
Note: 1. For an average sampling of 64.
2. Availability pending
Optical system Beam shape Beam size at sensing
distance
Sensing distance ±
measurement range
Resolution
(See Note)
Part
number
Diffuse reflective Spot beam 40 µm x 30 µm 40±10 mm (1.57 in ±0.40 in) 2 µm
ZX-LD40
100 µm x 65 µm 100±40 mm (3.93 in ±1.57 in) 16 µm
ZX-LD100
180 µm x 300 µm 300±200 mm (11.81 in ±7.87 in) 300 µm
ZX-LD300
Line beam 2000 µm x 50 µm 40±10 mm (1.57 in ±0.40 in) 2 µm
ZX-LD40L
2000 µm x 100 µm 100±40 mm (3.93 in ±1.57 in) 16 µm
ZX-LD100L
2000 µm x 300 µm 300±200 mm (11.81 in ±7.87 in) 300 µm
ZX-LD300L
Regular reflective Spot beam 30 µm x 40 µm 30±2 mm (1.18 in ±0.08 in) 0.25 µm
ZX-LD30V
Line beam 1800 µm x 60 µm
ZX-LD30VL
Optical system Measuring width Sensing distance Resolution (See Note 1) Part number
Through-beam 1-mm dia. 0 to 2000 mm (0 to 78.74 in) 4 µm
ZX-LT001
5 mm 0 to 500 mm (0 to 19.69)
ZX-LT005
10 mm
ZX-LT010 (See Note 2)
To Next Page
Need help?
General
