Removal
of
the
Genset
from
the
Vehicle
See Figure 5-1. When the genset has been discon-
nected from the electrical, exhaust and fuel sys-
tems, examine its mounting bolts and support mem-
bers. The genset drip tray is normally bolted to the
vehicle framework. Make sure that the genset
is
firmly supported before loosening any mounting
bolts or support members. A fork lift is recom-
mended to lift or move the genset.
IJiwARNINGI
Gensets are
heavy
and
can cause
severe
personal
injury
if
dropped. Use a
forklift
or
other
suitable means
to
handle the
genset
while removing
or
installing
it. Keep hands
and
feet clear incase the
genset
is
dropped.
FIGURE 5-1. SET REMOVAL
5-4
To Next Page
Loading...