Page 23 of 31
Figure 25. No Internet Connection Error
Body controller version dependency for updating calibrations on A26 Engines
Updating calibrations on A26 engines needs body controller version to be updated to kernel 708 or
higher. OnCommand Link when connected to A26 engine, checks the body controller version first before
attempting to do a calibration update. It allows calibration update on A26 engine module only if body
controller version is 708 or higher, otherwise it shows an error message indicating that body controller
version need to be updated first. Diamond logic builder can be used to update the body controller
software.
Figure 26. Body controller software needs an update
To Next Page
Loading...