OnCommand Link - Version History Oncommand Link Device

Page 3 of 31
Version History
OnCommand® Link Device
Version
Release Date
Change Log
v1.1
May 2
nd
, 2016
This version of OnCommand® Link device supports Over-The-Air
programming for Navistar’s engine control modules only.
v1.1.19
May 23
rd
, 2016
This version sets the device SSID as last 9 digits of VIN by
default. It can be changed to last 8 of MAC address using a
checkbox option in application page (under MENU).
v1.2.24
June 22
nd
, 2016
This version sets the device SSID as last 8 digits of MAC address
by default. It can be changed to last 9 of VIN using an option in
application page (under MENU).
v1.2.27
July 8
th
, 2016
Rebranded to OnCommand Link, minor fixes and user interface
related changes
v1.2.31
July 26
th
, 2016
Added user interface to switch between Write-Up tool and
Over-The-Air Programming (OTA) mode
v1.2.39
Nov 7th, 2016
Added description to update OnCommand® Link devices when
a new firmware/application update is available. Also added
details for a YouTube channel where OnCommand® Link
support videos are hosted.
V1.2.42
Feb 2nd , 2017
OnCommand® Link devices support Calibration updates for
2017 Cummins Engines.
V1.3.279
June 12th, 2017
-Updates screenshots wherever applicable.
-Added error message when more than one device connects
OnCommand Link.
-Notification for Device Management server connection error.
-View latest Health Report in OnCommand Link Application.
-Notification for Unsupported calibration
-Proxy configuration support for Connecting OnCommand Link
to Internet.
V1.3.281
July 13th, 2017
- Description updates to section ‘Programming Cummins Engine
with OnCommand® Link’
V1.3.309
Nov 16th, 2017
- Description updates to section ‘Programming Cummins Engine
with OnCommand® Link’
V1.3.337
May 4
th
, 2018
- Body controller kernel version dependency for A26 calibration
updates
V1.3.366
Dec 18
th
, 2018
- Updated Cummins engine info
- Added Health Report state indicators (App led/beeps)