OneTouch Verio IQ - Test Strip; Turning Your Meter on

11
1
Setting up your system
Turning your meter on
Press and hold
until the
start-up screen appears.
Once the start-up screen is
displayed, release .
Test strip
Verio IQ
Channel to
apply sample
Silver prongs
Insert into test strip port
m CAUTION
If you see any missing pixels
within the start-up screen,
there may be a problem
with the meter. Contact the
OneTouch® Customer Care Line
at 1 800 663-5521 or visit
www.OneTouch.ca.