OneTouch Verio IQ - Connect the End of the Mini USB Cable to the Meter; Plug the Cable into the Power Source

81
Battery (recharging)
6
1. Connect the end of the mini USB cable to
the meter
Start with the meter turned
off. Insert the mini USB
cable into the data/battery
charging port located on the
bottom of your meter.
2. Plug the cable into the power source
Plug the other end of the
cable to the USB port on
your computer.
NOTE: Connect only to
a computer certified to
UL60950-1. Please refer to
your computer manufacturer’s
labelling for confirmation.
Or,
Plug the other end of the
cable into the AC adapter.
Then, plug the AC adapter
into the wall outlet.