12
Setting up your system
1
Using the display backlight
The backlight comes on automatically whenever the
meter is turned on. After a few seconds of no activity, the
backlight will dim. Pressing any button or inserting a test
strip will turn the backlight back on.
When testing in the dark, press and hold
before you
insert the test strip. This will light the entire top of the
meter and provides enough light to test in the dark.
After the start-up screen, the
Main Menu is displayed.
A blue bar highlights the
current selection on the
meter display.
Apr 01
9:00 am
My History
Settings
Pattern Log
Example
Main Menu with
Settings highlighted
To Next Page
Loading...
