EasyManuals Logo

Onkyo DR-UN7 User Manual

Onkyo DR-UN7
84 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #49 background imageLoading...
Page #49 background image
49
Listening to the Radio—Continued
You can store the frequencies of stations one by one manually into the preset memory channels. This is useful
when you want to program the stations in your favorite order.
Turn on the power to the unit before you start the procedure.
Programming FM/AM Stations & XM Channels One by One Preset Write
2
5
2-5
You can preset up to 30 channels including
both FM and AM stations. For a set in which
XM stations are involved, you can preset up to
40 channels. For example, if you have already
stored FM stations to eight channels, you can
use 32 channels to store preset AM or XM sta-
tions.
Programmed FM, AM and XM stations are
indicated separately. Therefore, one of the pre-
set FM stations and one of the preset AM sta-
tions could use the same channel number.
The Preset Write function enables you to store
radio station frequencies to any channel num-
ber. For example, you could program three AM
stations to channels 2, 5, and 9.
Before auto presetting
Display
1
Tune into the FM/AM station or XM
channel that you want to store a
preset.
2
Press EDIT/NO/CLEAR and turn
MULTI JOG until Preset Write?
appears in the display.
3
Press MULTI JOG.
The channel number to be preset ashes.
To cancel presetting, press EDIT/NO/
CLEAR instead.
4
If you wish to change the channel
number, turn MULTI JOG.
SOURCE
SOURCE
5
Press MUTLI JOG to conrm.
If “Complete” appears
The radio station is registered to the pre-
set channel.
If “Overwrite?” appears
The channel youve selected is registered
already.
To register the new radio station by
deleting the existing radio station
Press YES/MODE.
To cancel presetting
Press EDIT/NO/CLEAR.
If “Memory Full” appears
The FM/AM stations have already been
programmed into all 30 channels. Delete
unnecessary stations (page 53) and try
again.
6
Repeat steps 2 to 5 to preset the next
channel.

Table of Contents

Other manuals for Onkyo DR-UN7

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Onkyo DR-UN7 and is the answer not in the manual?

Onkyo DR-UN7 Specifications

Power IconPower
power supplyAC 120 V, 60 Hz
power consumption115 W
stand-by power consumption0.2 W
Operating Environment IconOperating Environment
operating temperature5 ˚C–35 ˚C
operating humidity5 %–85 %
tuning frequency range87.5 MHz–107.9 MHz
Audio Specifications IconAudio Specifications
signal to noise ratio100 dB (LINE, IHF-A)
frequency response10 Hz–100 kHz/±3 dB (LINE)
total harmonic distortion5 % (Power Rated)
Weight and Dimensions IconWeight and Dimensions
dimensions205 W x 147 H x 353 D mm
weight5.4 kg

Related product manuals