Onkyo DR-UN7 User Manual

50
Listening to the Radio—Continued
Customizing the preset channels
The following additional functions are available:
• Naming a preset channel (see page 54)
• Erasing a preset channel (see page 53)
• Copying the radio station in the selected channel to
another (see page 52).
First, program the stations into preset channels (see pages 48-49).
Turn on the power to the unit before you start the proce-
dure.
Selecting Preset Stations
1
Press the INPUT or button to
select FM, AM or XM.
The channel selected most recently will
be recalled.
2
Turn MULTI JOG or press the dial
repeatedly to select the desired
preset channel.
Turn the dial counterclockwise to select
a lower channel number, or turn it clock-
wise to select a higher channel number.
1
2
Display
AUTO
SOURCE
FM ST
AUTO
SOURCE
FM ST
2
1
Using the remote controller
Preset
channel
Press the number buttons as
described in the examples
below to select the desired
preset channel.
Press
8
10
22
represents the tens digit.

Onkyo DR-UN7 Specifications

Power

power supply	AC 120 V, 60 Hz
power consumption	115 W
stand-by power consumption	0.2 W

Operating Environment

operating temperature	5 ˚C–35 ˚C
operating humidity	5 %–85 %
tuning frequency range	87.5 MHz–107.9 MHz

Audio Specifications

signal to noise ratio	100 dB (LINE, IHF-A)
frequency response	10 Hz–100 kHz/±3 dB (LINE)
total harmonic distortion	5 % (Power Rated)

Weight and Dimensions

dimensions	205 W x 147 H x 353 D mm
weight	5.4 kg