Onkyo DR-UN7 User Manual

52
Changing the Preset Channels
Using the delete and copy functions, you can delete preset stations, copy a preset station to another channel, or
change the channel number.
To change the channel number:
Use the copy and delete functions.
For example, if you wish to change channel 4 (which has
an FM station programmed) to channel 6 (an empty
channel):
1 Copy the station in channel 4 to channel 6.
2 Delete the station in channel 4.
If you copy a preset channel to another channel, the
name of the preset channel (see page 54) is also copied
to the other channel.
Tips for Changing the Preset
Channels
Copying a Preset Channel – Preset
Copy
1
Call the preset channel you wish
to copy.
2
Press EDIT/NO/CLEAR and turn
MULTI JOG until “PresetCopy?”
appears in the display.
3
Press MULTI JOG.
2, 5
2-5
Display
4
Turn MULTI JOG to select the pre-
set channel number to which you
wish to copy (destination).
5
Press MULTI JOG to confirm.
If “Complete” appears:
The same radio station is copied to the
preset channel.
If “Overwrite?” appears:
The channel you wish to copy to is regis-
tered already.
• To register the new radio station by
deleting the existing radio station:
Press MULTI JOG.
• To cancel copying:
Press EDIT/NO/CLEAR.

Onkyo DR-UN7 Specifications

Power

power supply	AC 120 V, 60 Hz
power consumption	115 W
stand-by power consumption	0.2 W

Operating Environment

operating temperature	5 ˚C–35 ˚C
operating humidity	5 %–85 %
tuning frequency range	87.5 MHz–107.9 MHz

Audio Specifications

signal to noise ratio	100 dB (LINE, IHF-A)
frequency response	10 Hz–100 kHz/±3 dB (LINE)
total harmonic distortion	5 % (Power Rated)

Weight and Dimensions

dimensions	205 W x 147 H x 353 D mm
weight	5.4 kg