Onkyo HT-R410 Service Manual

D925 223163, 1SS133,
223205 or 1SS270A or
223222 WG713A
Power transformer
T902 2301381 ! NPT-1358D
Capacitors
C901 3500196S ! RE275V-103M
C922 394662217 220uF,35V,Elect.
Resistors
R901 4000206S or ! RD1/2SPH-3.3M or
431533355 ! RC1/2GFKUL-3.3M,Solid
R924 443528204 RS1/2WBJ-82,Metal oxide
Relay
RL901 25065561, ! NRL-1P5A-DC12-127,
25065508, ! NRL-1P10A-DC12-093,
25065515 or ! NRL-1P5A-DC12-096 or
25065526 ! NRL-1P5A-DC12-102
Fuse holders
F901A,F901B 25052133 ! NSCT-1P2031
Sockets
P902 25051571 ! NSCT-2P1358
P931A 25051230 NSCT-5P1020
Plug
P901A 25055675 or ! NPLG-2P631 or
25056028 ! NPLG-2P0978
Label
F901C 29360842 Fuse
Secondary circuit PC board (NAPS-7878-1B)
CIRCUIT NO.
PART NO. DESCRIPTION
JL6951B,JL6952B 25051109 NSCT-5P896,Socket
Thermal detector PC board (NAETC-7880-1B)
CIRCUIT NO.
PART NO. DESCRIPTION
R6380 4000153 PTH9M04BF222TS2F333,Thermistor
JL6402B 25051087 NSCT-3P874,Socket
Connector PC board (NAETC-7884-1B)
CIRCUIT NO.
PART NO. DESCRIPTION
P206A 25055710 NPLG-14P666
P801B 25051239 NSCT-14P1029
NOTE: THE COMPONENTS IDENTIFIED BY MARK !

Onkyo HT-R410 Specifications

Amplifier Section

Power Output Front L/R Speakers	100 Watts per channel min. RMS at 8 ohms 2 channel driven, 20-20, 000 Hz, 0.08% THD
Power Output Center Speaker	100 Watts min. RMS at 8 ohms, 20-20, 000 Hz, 0.08% THD
Power Output Surround L/R Speakers	100 Watts per channel min. RMS at 8 ohms 2 channel driven, 20-20, 000 Hz, 0.08% THD
Dynamic Power Output at 3 ohms	230 watts × 2
Dynamic Power Output at 4 ohms	170 watts × 2
Dynamic Power Output at 8 ohms	115 watts × 2

Input and Output Impedance

Digital Input Optical	0.5 Vp-p, 75 ohms
Digital Input Coaxial	0.5 Vp-p, 75 ohms
Line Input (CD, VIDEO 1, 2, 3, TAPE)	200 mV, 47 kohms
Multichannel Input (DVD FRONT L/C/R, SURR L/R)	200 mV, 47 kohms
Multichannel Input (SUBWOOFER)	36 mV, 47 kohms
Output Level Rec out (TAPE, VIDEO 1)	200 mV, 470 ohms
Output Level Pre out (SUBWOOFER)	1 V, 470 ohms

Tuner Section

FM Tuning Range	87.5-108.0 MHz (100 kHz steps)
FM Usable Sensitivity Mono	11.2 dBf, 1.0 µV (75 ohms, IHF)
FM Usable Sensitivity Stereo	17.2 dBf, 2.0 µV (75 ohms, IHF)
FM 50 dB Quieting Sensitivity Mono	17.2 dBf, 2.0 µV (75 ohms)
FM 50 dB Quieting Sensitivity Stereo	37.2 dBf, 20.0 µV (75 ohms)
FM Capture Ratio	2.0 dB
FM Image Rejection Ratio	40 dB
FM IF Rejection Ratio	90 dB
FM Signal-to-Noise Ratio Mono	76 dB, IHF
FM Signal-to-Noise Ratio Stereo	70 dB, IHF
FM Alternate Channel Attenuation	55 dB, IHF, ±400 kHz
FM Selectivity	50 dB (DIN)
FM AM Suppression Ratio	50 dB
FM Total Harmonic Distortion Mono	0.2%
FM Total Harmonic Distortion Stereo	0.3%
FM Frequency Response	30 Hz-15 kHz, ±1.0 dB
FM Stereo Separation at 1 kHz	45 dB
FM Stereo Separation at 100 Hz-10 kHz	30 dB
AM Tuning Range	530-1, 710 kHz (10 kHz steps)
AM Usable Sensitivity	30 µV
AM Image Rejection Ratio	40 dB
AM IF Rejection Ratio	40 dB
AM Signal-to-Noise Ratio	40 dB
AM Total Harmonic Distortion	0.7%

General Specifications

Power Supply	AC 120 V, 60 Hz
Power Consumption	4.7 A
Dimensions (W × H × D)	17-1/8” × 5-7/8” × 14-3/8”
Dimensions in mm (W × H × D)	435 × 150 × 365 mm
Weight	19.0 lbs., 8.6 kg