EasyManuals Logo

Onkyo HT-RC430 User Manual

Onkyo HT-RC430
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #45 background imageLoading...
Page #45 background image
Advanced Operations
En-45
Late Night
Late Night
For Dolby Digital and Dolby Digital Plus sources, the
options are:
` Off
` Low:
Small reduction in dynamic range.
` High:
Large reduction in dynamic range.
For Dolby TrueHD sources, the options are:
` Auto
:
The Late Night function is set to “On” or “Off
automatically.
` Off
` On
Turn this setting on to reduce the dynamic range of Dolby
Digital material so that you can still hear quiet parts even
when listening at low volume levels—ideal for watching
movies late at night when you don’t want to disturb
anyone.
Note
The effect of the Late Night function depends on the material that
you are playing and the intention of the original sound designer,
and with some material there will be little or no effect when you
select the different options.
The Late Night function can be used only when the input source
is Dolby Digital, Dolby Digital Plus, or Dolby TrueHD.
The Late Night function is set to “Off” when the AV receiver is
set to standby. For Dolby TrueHD sources, it will be set to
Auto”.
Music Optimizer
Music Optimizer
` Off
` On
The Music Optimizer function enhances the sound quality
of compressed music files. The M.Opt indicator lights on
the AV receiver’s display.
Tip
Alternatively, you can use the AV receiver’s MUSIC
OPTIMIZER.
Note
The Music Optimizer function only works with PCM digital
audio input signals with a sampling rate below 48 kHz and analog
audio input signals.
The Music Optimizer is disabled when the Direct listening mode
is selected.
The setting is stored individually for each input selector.
CinemaFILTER
Cinema Filter
` Off
` On
Turn this setting on to soften overly bright movie
soundtracks, which are typically mixed for reproduction in
a movie theater.
CinemaFILTER can be used with the following listening
modes: Dolby Digital, Dolby Digital Plus, Dolby TrueHD,
Dolby Pro Logic II Movie, Multichannel, DTS, DTS Neo:6
Cinema, DTS 96/24, DTS-HD High Resolution Audio,
DTS-HD Master Audio and DTS Express.
Note
The CinemaFILTER may not work when used with certain input
sources.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Onkyo HT-RC430 and is the answer not in the manual?

Onkyo HT-RC430 Specifications

General IconGeneral
Receiver typeSurround
Frequency range5 - 100000 Hz
Input sensitivity200 mV
Audio output channels5.1 channels
Signal-to-Noise Ratio (SNR)100 dB
Total Harmonic Distortion (THD)0.08 %
Dynamic power per channel (3 Ohm)160 W
Dynamic power per channel (4 Ohm)125 W
Dynamic power per channel (8 Ohm)85 W
Power output per channel (20-20KHz@8 Ohm)60 W
HDMI in4
Audio (L/R) in6
Composite video in5
Digital audio coaxial in1
Component video (YPbPr/YCbCr) in2
Connectivity technologyWired
Speakers connectivity typeClamp terminals
Ethernet LANNo
AM band range530 - 1710 kHz
FM band range87.5 - 107.9 MHz
Supported radio bandsAM, FM
Preset stations quantity40
3DYes
Supported video modes1080p
Display-
Product colorBlack
Audio decodersDolby Digital Plus, Dolby TrueHD, DTS-HD Master Audio
Damping factor60
Apple docking compatibilityiPhone, iPod
AC input voltage120 V
AC input frequency60 Hz
Power consumption (standby)0.2 W
Power consumption (typical)40 W
Weight and Dimensions IconWeight and Dimensions
Depth318 mm
Width435 mm
Height150 mm
Weight7600 g

Related product manuals