84
Front Panel≫ Rear Panel≫ Remote≫
Contents
≫
Connections
≫
Playback
≫
Setup
≫
4. Analog Audio Input
Change input assignment between the input selectors and AUDIO IN jacks. If you
do not assign a jack, select "---".
Setting Item Default Value Setting Details
BD/DVD AUDIO 1 "AUDIO 1" to "AUDIO 4": Assign a desired AUDIO
IN jack to the BD/DVD button.
GAME --- "AUDIO 1" to "AUDIO 4": Assign a desired AUDIO
IN jack to the GAME button.
CBL/SAT AUDIO 2 "AUDIO 1" to "AUDIO 4": Assign a desired AUDIO
IN jack to the CBL/SAT button.
PC --- "AUDIO 1" to "AUDIO 4": Assign a desired AUDIO
IN jack to the PC button.
CD AUDIO 4 "AUDIO 1" to "AUDIO 4": Assign a desired AUDIO
IN jack to the CD button.
TV/TAPE AUDIO 3 "AUDIO 1" to "AUDIO 4": Assign a desired AUDIO
IN jack to the TV/TAPE button.
PHONO PHONO The setting cannot be changed.
5. My Input Information
You can view the content registered in MY INPUT 1 to 4.
The registered settings are displayed in the list.
(Main)
Setting Item Default Value Setting Details
Preset Preset 1 Selects a preset number from among "Preset 1",
"Preset 2", "Preset 3" and "Preset 4".
Input Selector --- Displays the input selector that has been set.
Network Service --- Displays the Network Service that has been set.
Band --- Displays the band, "AM", "FM" or "DAB" that has
been set.
Station --- Displays the Preset Name of the radio station that
has been set.
Setting Item Default Value Setting Details
Listening Mode --- Displays the listening mode (Stereo, Pure Audio,
Direct) that has been set.
Volume --- Displays the volume level that has been set. (Upper
limit "82")
• You cannot set a higher value than that of
"3.
Audio Adjust" - "Volume" - "Maximum Volume".
Multi Zone --- Displays the output destination (Multi Zone) that
has been set.
• "Band" is displayed only when the input selector is set to "TUNER".
• "Station" is displayed only when the input selector is set to "TUNER" or "NET".
• "Network Service" is displayed only when the input selector is set to "NET".
• Preset Name of "Station" (only when the input selector is set to "TUNER") is displayed
with the name set by "4. Source" - "Name Edit". If the name is not set, the frequency of
the radio station is displayed instead.
(Zone 2)
Setting Item Default Value Setting Details
Input Selector --- Displays the input selector that has been set.
Network Service --- Displays the Network Service that has been set.
Band --- Displays the band, "AM", "FM" or "DAB" that has
been set.
Station --- Displays the Preset Name of the radio station that
has been set.
• "Band" is displayed only when the input selector is set to "TUNER".
• "Station" is displayed only when the input selector is set to "TUNER" or "NET".
• "Network Service" is displayed only when the input selector is set to "NET".
• Preset Name of "Station" (only when the input selector is set to "TUNER") is displayed
with the name set by "4. Source" - "Name Edit". If the name is not set, the frequency of
the radio station is displayed instead.
To Next Page
Loading...
