Onkyo TX-RZ3100 - Page 123

Aspeakerproducesnosound
Makesurethatthepolarityofthespeakercables(＋/－)iscorrect,andthatno
barewiresareincontactwiththemetalpartofspeakerterminals.
Makesurethatthespeakercablesarenotshorting.
CheckhowtoconnectthespeakersintheBasicManualthatthespeaker
connectionshavebeenmadecorrectly.Settingsforthespeakerconnection
environmentneedtobemadein"AccuEQRoomCalibration"inInitialSetup.
Checkin"InitialSetup"intheBasicManual.
Dependingonthesourceandcurrentlisteningmode,notmuchsoundmaybe
producedbythesurroundspeakers.Selectanotherlisteningmodetoseeif
soundisoutput.
Ifyouareinstallingsurroundbackspeakers(forcompatiblemodelsonly),
surroundspeakersarerequired.
Troubleshooting