Onkyo TX-RZ3100 - Page 29

2. Afterinputting,select"OK"withthecursorsandpressENTER.
Theinputnamewillbesaved.
Tonameapresetradiostation,pressTUNERontheremotecontroller,select
AM/FMandselectthepresetnumber.
Thiscannotbesetifthe"NET"or"BLUETOOTH"inputisselected.
AudioSelect
Selectthepriorityforinputselectionwhenmultipleaudiosourcesareconnectedto
oneinputselector,suchasconnectionstoboththe"BD/DVD"HDMIINjackand
the"BD/DVD"AUDIOINjack.Thesettingcanbeseparatelysettoeachinput
selectorbutton.Selecttheinputselectortoconfigure.Notethattherearesome
defaultvaluesyoucannotchange.
AudioSelect
DefaultValue:BD/DVD:HDMICBL/SAT:HDMIGAME:HDMISTRMBOX:
HDMIPC:HDMIAUX:HDMICD:OPTICALTV:OPTICALPHONO:
Analog
"ARC":WhengivingprioritytoinputsignalfromARCcompatibleTV.
Thesettingcanbeselectedonlywhen"5.Hardware""HDMI""Audio
ReturnChannel"issetto"Auto"andalsothe"TV"inputisselected.
"HDMI":WhengivingprioritytoinputsignalfromHDMIINjacks
ThesettingcanbeselectedonlywhentheinputisassignedtotheHDMI
jackinthe"1.Input/OutputAssign""HDMIInput"setting.
"COAXIAL":WhengivingprioritytoinputsignalfromDIGITIALINCOAXIAL
jacks
Thesettingcanbeselectedonlywhentheinputisassignedtothe
COAXIALjackinthe"1.Input/OutputAssign""DigitalAudioInput"
setting.
"OPTICAL":WhengivingprioritytoinputsignalfromDIGITIALINOPTICAL
jacks
Thesettingcanbeselectedonlywhentheinputisassignedtothe
OPTICALjackinthe"1.Input/OutputAssign""DigitalAudioInput"
setting.
"Analog":Toalwaysoutputanalogaudioindependentlyoftheinputsignal
ThesettingcanbeselectedonlywhentheinputisassignedtotheAUDIO
INjackinthe"1.Input/OutputAssign""AnalogAudioInput"setting.
PCMFixedMode
DefaultValue:Off
SelectwhethertofixinputsignalstoPCM(exceptmultichannelPCM)when
youhaveselected"HDMI","COAXIAL",or"OPTICAL"inthe"AudioSelect"
setting.Setthisitemto"On"ifnoiseisproducedortruncationoccursatthe
beginningofatrackwhenplayingPCMsources.Select"Off"normally.
Changing"AudioSelect"changesthesettingto"Off".
Thesettingcannotbechangedwhen"TUNER","NET",or"BLUETOOTH"input
isselected.