Need help?Do you have a question about the Onwa KCOMBO-7 and is the answer not in the manual?
General| Display Size | 7 inches |
|---|---|
| Display Resolution | 800 x 480 pixels |
| GPS | Yes |
| Chartplotter | Yes |
| Sonar Frequency | 50/200 kHz |
| Max Depth | 1000 meters |
| Waterproof Rating | IPX7 |
| Operating Temperature | -15°C to 55°C |
| Storage Temperature | -20°C to 60°C |
| Power Supply | 12V DC |
| Display | Color TFT LCD |
| Power Output | 600W (RMS) |
Guidelines for safe operation of the equipment.
Guidelines for safe installation of the equipment.
Instructions on how to power the unit on and off.
How to set recording intervals and stop track logging.
Methods for adding new waypoints using cursor or own ship's position.
How to set a Man Overboard (MOB) mark.
Detailed steps for editing existing waypoint information.
Step-by-step guide to define new routes using waypoints.
How to modify existing routes, including replacing waypoints.
How to set a destination by placing the cursor on the map.
Setting a destination using a pre-saved waypoint.
Using a saved route as the active destination.
Navigating to a saved track log.
Setup for the alarm that triggers if the vessel drifts from its anchor position.
Alarm that warns when the vessel is approaching a set destination.
Alarm for deviating from the intended course line.
Configuring GPS input/output and data settings.
Displaying a list of detected AIS vessels.
Setting up and managing the collision avoidance alarm.
Visualizing AIS targets in relation to radar scope.
Handling and display of emergency alarms received via AIS.
Accessing advanced sonar settings and features.
Configuring fish, bottom, and temperature alarms.
To Next Page