Opal OD5+ Series - 5 Specifications; General Specifications

User Manual v.2.2
OD5+ Serie
OPAL – Your AutoID System Integrator
opal-holding.com
- 29 -
5. Specifications
5.1 General Specifications
Model Name
OD5+
OD5+300
Resolution
203 dpi (8 dots/mm)
300 dpi (12 dots/mm)
Print Method
Thermal transfer / thermal direct
CPU
32 Bit RISC
Label Sensor
Adjustable (Sensor snaps into place)
Sensor Type
Reflective / Transmission
Label Detection
Types: Label Gap, Black Mark and punched hole
Detection: The length of the label and/or by software (driver) defined length of
label.
Max Print Speed
100 mm/s (4 IPS)
Print Length
Min. 10mm (0.39”)
Max. 1727mm (68”)
Min. 10mm(0.39“)
Max. 1727 mm (68”)
Print Width
108mm (4.10")
105,7mm
Label gap
Label gap, Ticket with punched hole and Black mark Min. 2 mm; Max. 100 mm
(0,079“ ~ 3,937“)
Media opacity
Label gap: opacity on Liner: >50%; opacity on Label + Liner: <25%
Ticket with punched hole: opacity on ticket <30%
Black mark: Reflectance difference between black mark and liner: >15%
Continuous Paper: opacity on paper <30%
Label Role-ø
Max. 127mm (5”) with a label core diameter of 25.4 mm and 38 mm (1" and
1.5")
max. 110 mm (4.3") with a label core of 76 mm (3")
Label Core-ø
25.4 mm and 38.1 mm (1" and 1.5") max. labels roll diameter 127 mm
76 mm (3") max. label diameter 110 mm
Label Width
25mm to 118mm (1“bis 4.65”)
Label Thickness
0.06~0.3mm (0.0025”~0.012”)
Ribbon
Length: 300 m (981 ft)
Max. Outside diameter: 64mm (2.52 “)
Types: Transfer Ribbon (wax, wax/resin, resin)
In width 30mm to110mm (1.88” - 4.33”)
Inner diameter of the core: 12,7mm (0.5”)
Printer Language
E-SIM
Software
Application: Seagull Bartender Evaluation
Certified Windows driver
Microsoft Windows Vista und Windows 7, 8, 8.1, 10
Windows Server 2003, 2008, 2008 R2, 2012, 2012 R2 und 2016
32-Bit und 64-Bit (x64)- editions.
Internal Fonts
5 internal alphanumerical fonts. Those can horizontal 8 and vertical 9 times be
changed. All fonts can be set in 4 different directions.
Graphic Format
Printer changes common graphics to internal format
Barcodes
1D Barcode: Code 39, RSS-14, Code 128 auto mode A,B oder C. UCC/EAN-
128, UPC A/E(add on 2&5), I 2 of 5, UPS I 2 of 5, EAN 8 / 13 (add on 2 & 5),
Codabar, Postnet 11 & 13.
2D Barcode: Datamatrix, MaxiCode , QR Code , Micro QR Code und PDF 417
Interfaces
Serial, Parallel, USB and LAN
Memory
8MB Flash (4MB for user storage) ; 16MB SDRAM