213Self-help, vehicle care
Picture no: 18134s.tif
Dipped beam
1. Open bonnet and engage support.
2. Disengage wire clip and remove cover.
Picture no: 18135s.tif
3. Press base to the side and remove from
reflector.
Picture no: 17270t.tif
4. Detach plug connector from bulb.
5. Insert new bulb in reflector so that the
locating tab of the bulb holder aligns
with the reflector recess. Attach the
bulb holder so that the locating tab
points upwards.
6. Engage bulb.
7. Attach connector to bulb.
8. Put on cover and engage wire clip.
To Next Page
Loading...
