222 Self-help, vehicle care
Picture no: 18264s.tif
5. Gently press the three locking lugs on the
outside of the bulb holder outwards and
remove bulb holder.
Picture no: 18265s.tif
Bulbs in bulb carrier
6. Remove bulb from holder, gently
pressing the bulb and rotating it.
7. Insert new bulb, pressing it gently and
rotating it.
8. Engage bulb holder in bulb housing,
ensuring that it properly engages.
Picture no: 18266s.tif
9. Ensure that the bulb holder seal is
positioned as illustrated.
1 = Tail lamp
2 = Reversing light
3 = Turn signal lamp
4 = Tail lamp/brake lamp
5 = Fog tail lamp (only on one side
depending on country-specific
regulations)
To Next Page
Loading...
