74 Lighting
High beam, headlamp flash
To switch from low to high beam, push
lever forwards.
To switch to low beam, pull lever back
towards steering wheel.
To activate the headlamp flash, pull lever
towards steering wheel. The high beam is
switched on while activated.
The b lue control indicator C illum ina tes
when the high beam or head lamp flash
is on.
Turn signals
To switch on, p ush lever up or d ow n.
After operation, the turn signal lever
returns to its starting position.
If lever is moved past resistance point, turn
signal lam p rem ains on. When steering
wheel moves b ack towards the straight-
ahead position, turn signal lamp is
automatic ally deactivated.
Tap signal: Move lever to resistance point
and release, to activate the turn signals
when changing lanes or the like. Move lever
to resistance point and hold for the turn
signals to flash for long er.
Switc h the turn signal off manually by
mov ing the lever slightly.
Lever up = Right turn signal
Lever down = Left turn signal
To Next Page
Loading...
