150 Self-help, vehicle care
License plate lamps
1. Remove 2 screws holding license plate
la m p t o f a s ci a .
2. Rotate and p ull license plate lamp
forwards throug h fascia opening.
3. Rotate bulb socket anti-cloc kwise.
4. Remove bulb from b ulb soc ket and insert
new bulb, without touching the glass.
5. Rotate bulb socket clockwise and
replace license plate lam p into orig inal
position.
6. Replace 2 screws to hold license plate
la m p t o f a s ci a .
Luggage compartment lamp
1. Open luggag e compartment and prise
out bulb housing.
2. Deta ch plug connector from bulb
housing.
3. Remove bulb from bulb socket and insert
new bulb, without touching the glass.
4. Attach plug connector to bulb housing,
push bulb housing into orig inal position
and close lugg age compartment.
Centre high-mounted stop lamp,
side repeater lamps,
courtesy lamps,
instrument illumination
W e re co mme nd ha ving bu lb re place men ts
carried out by a workshop.
To Next Page