149Self-help, vehicle care
Rear brake, tail, turn signal lamps
1. Open lug gage compartment
2. Remove 2 bolts holding the bulb
assem bly to the vehicle body.
3. Pull bulb assembly away from vehicle
body and detach plug connector from
bulb assembly.
4. Rotate bulb socket a nti-clockwise and
rem ove from bulb assembly.
5. Remove bulb from bulb socket and insert
new bulb, without touching the glass.
6. Replace bulb soc ket in bulb assem bly
and rotate bulb socket clockwise.
7. Replace bulb assembly into original
position and replace 2 bolts to hold bulb
assembly to the vehicle body.
8. Close luggage compartment.
Reversing lamp, fog tail lamp
1. Reach behind, up and under rear
panelling and locate bulb socket.
2. Rotate bulb socket anti-clockwise and
remove from lamp assembly.
3. Remove bulb from bulb socket and insert
new bulb, without touching the g la ss.
4. Install bulb socket by lining up the tabs in
the lamp assembly and rota te bulb
socket clockwise.