148 Self-help, vehicle care
Parking lamps
1. Open bonnet.
2. Rotate bulb socket anti-cloc kwise and
pull it out of headlamp assem bly.
3. Detach plug connector from bulb socket.
4. Remove bulb from b ulb soc ket and insert
new bulb, without touching the glass.
5. Attach p lug connector to bulb soc ket,
push bulb socket into headlamp
assem bly and rotate bulb socket
clockwise.
6. Close bonnet.
Front turn signals, front fog lamps
1. Open bonnet.
2. Reach through aperture between front
panelling and bonnet and locate bulb
assembly.
3. Rotate bulb socket a nti-clockwise and
pull out bulb assembly.
4. Detach plug connector from b ulb socket.
5. Remove bulb from bulb socket and insert
new bulb, without touching the g la ss.
6. Attach plug connector to bulb socket,
push bulb assembly into original position
and rotate bulb socket clockwise.
7. Close bonnet.
To Next Page