Opel GT - Page 83

83Infotainment system
Six-disc CD play er 3
In vehicles with a six-disc CD player, set the
time and date as follow s:
 Turn ignition key to ACC or RUN.
 Pr e ss th e X e knob.
 The Infotainment system switches on.
 Pr e ss th e MENU 4 button until the
set-up menu is displayed.
 The clock option label appears on the
display.
 Press the appropriate button 6
loca ted below the clock option label.
 The HR, MIN, MM, DD, YYYY
(hour, minute, month, day and year)
labels appear on the display.
 Press the appropriate button 6
located b elow the label that you wish
to chang e.
 Press the same button 6 a gain to
increase the time/date.
 The value selected increases by one
(hour/minute/month/day/year) every
time the same button 6 is p r e ss e d
again.
z The value s ele cted can also be
changed using the SE EK wf,
SEEKq g, FW D c and REV d
buttons a nd the K 8 tune knob,
as follows:
 Press the SEEKwf button or the
FWD c button.
 The value se le cted increases
(hour/minute/month/day/year).
- or -
 Press the SEEKq g button or the
REV d button.
 The value se le cted de cre ases
(hour/minute/month/day/year).
- or -
 Turn the K 8 tune knob clockwise or
anticlockwise.
 The value se le cted increases or
decreases (hour/minute/month/day/
year).
The date does not display automatically.
To display the date, proceed as follow s:
 Press the MENU 4 button follow ed by
the button 6 located below the clock
option label, with the Infotainment
system on.
 The date appea rs.
z After a few seconds, the display reverts
bac k to the normal ra dio and time
display.
C ha nging default time and date settings
The default time and date settings can
be changed from a 12 hour c lock to a
24 hour clock and from the date format
MM/DD/YYYY (month/day/year) to
DD/MM/YYYY (day/month/year).
Cha nge the default time or date setting s
as follows:
 Press the C 1 clock button
(single-d isc CD play er)
- or -
Press the MENU 4 b utton
(six-d isc CD play er 3).
 Press the appropriate button 6
located b elow the forward arrow label
on the display.
 The 12H, 24H, MM/DD/YYYY and
DD/MM/YYYY labels a ppear on the
disp lay.
 Press the appropriate button 6
located below the label tha t you wish
to select.
 Press the C 1 clock button or the
MEN U 4 button to apply the
selection.
 The selection is ap plied.
z Alternatively, allow the screen to
time out a nd the selection made will
becom e the default time/date setting.