Operation 37
Falcon+ Operator Manual
OPEX Corporation
4.2.3. Running Jobs
Now that you have logged into the system and taken some time to familiarize
yourself with the main controls and components, you are ready to begin
operating the machine. This section will give you a general outline of how to
use the CertainScan software to process items.
Select a job:
1. Select Main in the menu bar (see Figure 4-5).
2. Click the icon for the job you want to run.
Figure 4-5: Main Screen
Note: The jobs you see may be different than those shown in Figure 4-5.
To Next Page
Loading...
