Optelec ClearView+ - Page 11

Optelec ClearView
+
English Page 9
 When moving the ClearView
+
to another location, remove
the monitor from the base unit for safe and easy
transportation. Carry the ClearView
+
base unit by using
the two grips located on either side of the base unit table
mid-way between the front and back of the unit at table
level.
 Always turn the power off when the CV
+
is not in use.
 Always unplug the CV
+
before cleaning it. Use a soft,
damp cloth to clean the exterior surfaces. Do not use any
cleaning agents or any abrasive materials as these will
damage your CV
+
.
 Only use the mains power supply provided.