Optelec ClearView+
English Page 8
2. Safety and Care
Please read the instructions carefully before setting up your
ClearView
+
. Keep this user manual for future reference.
Use the ClearView
+
(CV
+
) indoors. Do not expose the CV
+
to extreme or rapid changes in temperature or humidity.
Do not place the ClearView
+
near a radiator or heater, or
where it may be exposed to direct sunlight. These
conditions may damage the CV
+
’s electronic or optical
components.
Do not place the CV
+
on an unstable surface. It may fall,
causing serious damage to the unit, or injury to the user.
If using your own monitor mounted on top of the
ClearView
+
system, make sure it does not weigh more
than 16 kg. The ClearView
+
Monitor Platform was
designed to support a maximum of 16 kg.
Firmly grip the monitor by the surrounding frame when
positioning to ensure stability to the entire system. When
readjusting the 22” or the 24” monitor with the five-
directional ultra-flexible TFT arm, please ensure the
monitor does not tilt or rotate against the wings of the
electronic box.
The reading table and the monitor arm contain movable
parts. Please be careful when adjusting the screen
position, or when operating the reading table as to
prevent fingers or any loose clothing from getting caught
in the operating mechanism. If you have difficulty
operating the CV
+
safely, please seek assistance or
contact your Optelec distributor.
Contact your Optelec distributor to service this device if
necessary. Do not open your CV
+
; this will void the
warranty.
To Next Page
Loading...
Need help?
General
